CONTACT


E-mail:
team3@huataogroup.com 

Phone/WhatsApp:
+86-13331385676

Address:
NO.298 Zhonghua North Street,Shijiazhuang city, China.

chad Impact Crusher

The motor drives high-speed rotation of rotor; materials collide with plate hammer on the rotor, and are crushed due to the high-speed impact of plate hammer; materials affected by crushing will be struck back on lining plate to crush again; finally they will be discharged from outlet. Adjustment of the clearance between back striking rack and rotor rack can change discharge size and material shape.

Category:

chadCrusher Series

Product Description

Description

The motor drives high-speed rotation of rotor; materials collide with plate hammer on the rotor, and are crushed due to the high-speed impact of plate hammer; materials affected by crushing will be struck back on lining plate to crush again; finally they will be discharged from outlet. Adjustment of the clearance between back striking rack and rotor rack can change discharge size and material shape.

Note

★ After stopping the feeding, let the crusher continue to run until the materials in the crushing chamber are processed.
★ When the equipment is stopped, first cut off the working power.
★ After the impact crusher is stopped, the discharge conveyor can be stopped until the material on the discharge conveyor has been conveyed.
★ After the motor is repaired or rewired, it is recommended to carefully check the correctness of the direction to ensure that the equipment rotates in the specified direction, and it is strictly forbidden to run in the opposite direction.
★ If the equipment is stopped due to the excessive particle size of the crushed material, the user should check the wear of the plate hammer after stopping to prevent the rotor from being worn out.
★ If the equipment is stopped due to serious wear of the blow bars, when the blow bars are adjusted 180°and used again, the weight of each blow bar should be equal and balanced to prevent vibration after starting.

Application

Impact crusher is used in metallurgy, mining, cement, chemical, refractory materials and ceramic industry, as well as the highway construction, water conservancy project, crushed stone in architecture, mechanism sand processing, etc.

Product Gallery