PP (Polypropylene) Biaxial Geogrids

PP (Polypropylene) Biaxial Geogrid Description

PP (Polypropylene) Biaxial Geogrids appearance approximate square network-like structure, which is made of polypropylene as the main raw material, by extrusion, and then vertical and horizontal stretching a high strength geotextile material. The material in the vertical and horizontal have great tensile strength, is widely used in soft foundation reinforcement treatment.

PP (Polypropylene) Biaxial Geogrid Specification

1. Strength : 15/15KN/M -- 50/50KN/M

2. Width: from 2m - 6m

3. Length: as request

4. Package: paper core, black waterproof membrane

5. Loading: 20ft container, 40ft high container

PP (Polypropylene) Biaxial Reinforcement Geogrid Applications

1, all kinds of roads, railways, airports roadbed enhancement;
2, permanent foundation bearing large car park and terminal freight yard and other enhancements;
3, railway, highway slope protection, culvert enhancement;
4-way stretch geogrid slope secondary enhanced enhanced, and further enhance the soil, prevent soil erosion;
5, mining, tunnel reinforcement.

We also can do Uniaxial Geogrid.

PP (Polypropylene) Biaxial Geogrid Construction method

Excavation of foundation bed, set the sand cushion (height of not more than 10cm), rolled into the platform, laying grille, the vertical axis to be consistent with the direction of the main force, longitudinal lap 15-20cm, lateral 10cm, lap banding with plastic tape and laying on the grill every 1.5-2m with U-nails on the ground, laying geogrid should be promptly backfill material, laying geogrid layers depending on the technical requirements.

we can supply Fiberglass Geogrid, HDPE Geogrid

PP (Polypropylene) Biaxial Geogrid construction process requirements

PP (Polypropylene) Biaxial Geogrid paved surface should be relatively smooth, paving layer after passing the acceptance, in order to prevent the phenomenon of vertical skew, press width white line drawn in the pavement layers or hung, you can begin paving, and iron nails grille ends (each 8 m wide with a nail, uniform distance fixed).

After fixing the ends of the grid, with a paving machine to pull forward slowly grill shop, shop 10 meters long each artificial straightening and tensioning time, until the volume grid Puwan, holes and under the roll, operation with the former.
Puwan roll began rolling it again in the forward direction from the starting point of the roller with the 6T-10T.

(Such as paving in the leveling layer in the upper layer and the surface, the steel roller roller is appropriate; such as grid laid directly on the concrete pavement with a rubber roller roller appropriate.)

Then shop: a roll as long as the unit segment length laid, after long segment shall be covered within the grid covered, and then check the overall paving quality, and then paving the next paragraph. The next section of paving, grille and grille can lap length 10-15CM and continue to move forward with the direction of the second paragraph after the shop or nails fixed wedge. And so on, with the former operating requirements.

Looking for ideal Plastic Pp Biaxial Geogrids Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Plastic Biaxial Geogrids are quality guaranteed. We are China Origin Factory of Polypropylene Biaxial Geogrids. If you have any question, please feel free to contact us.

Product Categories : Geosynthetics > Geogrids