Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Categories
Contact Us
E-mail:
team3@huataogroup.com
Phone/WhatsApp:
+86-13331385676
Address:
NO.298 Zhonghua North Street,Shijiazhuang city, China.
Rubber Membrane Filter Plates for Mining and Tailings Dewatering
- Product Details
-
HUATAO Rubber Membrane Filter Plates are designed for high-performance solid-liquid separation in mining, mineral processing and industrial slurry filtration. Also known as Membrane Filter Plates, Rubber Diaphragm Filter Plates or Membrane Squeeze Plates, these components provide an additional squeezing stage after conventional pressure filtration to further reduce residual moisture in the filter cake.
The flexible rubber membrane expands under water or compressed-air pressure and applies uniform mechanical pressure to the formed cake. This secondary squeeze stage improves dewatering efficiency, increases cake solids and can reduce the time required to reach the target final moisture.
Our membrane plates are particularly suitable for mine tailings, mineral concentrates, coal slurry, metallurgical sludge and other difficult-to-dewater materials.
Designed for Mineral Processing Applications
Mining operations often require efficient recovery of process water while producing filter cakes suitable for handling, transportation or dry stacking. Conventional chamber filtration may leave excessive residual moisture, particularly when processing fine particles or compressible cakes.
Rubber membrane filter plates provide additional cake compression after the feeding stage, helping remove more liquid from the solids before plate opening and cake discharge.
Typical applications include:
- Iron ore tailings dewatering
- Copper concentrate filtration
- Gold mine tailings treatment
- Zinc and lead concentrate dewatering
- Coal washing and fine coal recovery
- Nickel and manganese slurry filtration
- Mineral processing plant wastewater
- Tailings dry stacking systems
Replaceable Rubber Membrane Design
HUATAO can supply Replaceable Rubber Membrane Plates in which the flexible membrane is installed on a rigid supporting plate.
When the rubber membrane reaches the end of its service life, the membrane component can be replaced separately in suitable designs without replacing the complete plate assembly.
This design offers important advantages for mines and mineral-processing plants:
- Lower spare-part replacement cost
- Reduced maintenance downtime
- Longer usable life of the plate body
- Easier onsite maintenance
- Flexible material selection for different slurry conditions
Replaceable membrane designs are especially useful in applications involving abrasive mineral slurry and continuous filtration cycles.
Key Advantages
Lower Filter Cake Moisture
The secondary membrane squeeze removes additional liquid remaining inside the filter cake after initial filtration. A drier cake is easier to discharge, transport, stack or process further.
Improved Process Water Recovery
Removing more liquid from the cake allows more process water to be returned to the plant, which is particularly important in dry mining regions and closed-loop water systems.
High Wear Resistance
Rubber compounds can be selected according to slurry abrasiveness, chemical composition, temperature and operating conditions.
Shorter Dewatering Cycle
The membrane squeeze stage can help reach the required final cake moisture more efficiently than extending the feed-pressure filtration stage alone.
OEM Replacement Capability
HUATAO can manufacture membrane filter plates based on drawings, existing samples or dimensional information from the original press.
Technical Specifications
Parameter Available Options Product Rubber Membrane Filter Plate Alternative Name Diaphragm Filter Plate / Membrane Squeeze Plate Plate Dimensions 630 × 630 mm to 2000 × 2000 mm Membrane Material NR / EPDM / NBR / Custom Rubber Core Plate PP / Reinforced PP / Composite Membrane Structure Replaceable / Embedded / Customized Feed Port Center / Corner / Custom Squeeze Medium Water / Compressed Air Filtrate Outlet Open / Closed / Custom Drainage Surface Studded / Grooved / Customized Operating Pressure According to filter press design Temperature According to selected elastomer OEM Service Available All operating pressure, temperature and chemical-resistance values should be confirmed according to the specific filter press and slurry conditions.
Rubber Material Options
EPDM Membrane
EPDM rubber is commonly selected for aqueous slurry and applications requiring resistance to many acids, alkalis, heat and weathering.
NBR Membrane
NBR offers good resistance to oils, hydrocarbons and certain industrial chemicals, making it suitable for process applications containing oily media.
Natural Rubber and Wear-Resistant Compounds
Natural rubber and customized wear-resistant compounds can be selected where elasticity, abrasion resistance and repeated flexing are the main considerations.
Typical Mining Applications
Tailings Dry Stacking
Membrane filter presses are widely used to produce lower-moisture tailings cakes suitable for conveying, stacking and water recycling.
Concentrate Dewatering
Copper, iron ore, gold, zinc and other concentrates require stable final moisture before transport, storage or downstream processing.
Coal Washing
Fine coal and coal-washing sludge often contain high levels of water. Membrane squeezing helps recover additional liquid and improve cake handling.
Metallurgical Sludge
The plates are suitable for treatment of fine sludge generated in mineral processing, hydrometallurgy and metal-refining processes.
OEM Filter Press Plate Replacement
For replacement projects, HUATAO can manufacture plates according to the customer's existing equipment.
Please provide:
- Filter press brand and model
- Plate length and width
- Plate thickness
- Feed-hole dimensions and position
- Filtrate-hole arrangement
- Membrane material
- Working pressure
- Slurry composition
- Operating temperature
- Photos or technical drawings
- Required quantity
Accurate dimensional information is particularly important for older equipment because plate sealing surfaces, handles and port configurations may differ between press manufacturers.
Why Choose HUATAO
HUATAO supplies wear-resistant components and replacement parts for mining and mineral-processing equipment. Our rubber membrane filter plates can be customized according to slurry characteristics, press configuration and operating requirements.
Whether the application involves tailings dewatering, concentrate filtration or industrial sludge treatment, we focus on helping customers achieve reliable filtration, lower residual moisture and reduced maintenance costs.
Send us your filter plate drawing, existing plate photos or filter press model for technical evaluation and quotation.
Key words:
Get A Quote
Note: Please leave your email address, our professionals will contact you as soon as possible!
Related Products
Content update in progress