Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
We Help Customers To Meet The Great Challenges Of Our Time.
VIEW PRODUCTSWhich Crusher Wear Parts Supplier Exports to Australia and Canada? – Ultimate Buyer’s Guide
Jun 12,2026
1. Definition
A crusher wear parts supplier provides replacement components that protect the crusher frame while crushing ore. Export suppliers also manage international logistics, customs documentation, and quality assurance for mining customers outside their home country.
2. Working Principle
Crusher wear parts – jaw plates, mantles, concaves, blow bars – directly contact material. Manganese steel work-hardens under impact: surface hardness increases from ~200 BHN to 500+ BHN while the core remains tough, providing wear resistance without brittleness.
3. Benefits of Choosing an Experienced Export Supplier
Reliable international logistics – Established shipping routes to Australia, Canada, and other mining regions
Quality documentation – Material certs and inspection reports required for mining company supplier qualification
OEM-compatible fit – Direct replacement without modification
Cost savings – 30–50% lower than OEM with equal or better wear life
Customization – Ability to modify tooth profiles and Mn grades for specific ores
4. Suppliers with Proven Export Experience to Australia and Canada
Known suppliers identified in industry sources:
| Supplier | Headquarters | Exports to Australia | Exports to Canada |
|---|---|---|---|
| BDI Wear Parts | Canada | ✓ | ✓ |
| Jiangxi Duma Machinery | China | ✓ | ✓ |
| Crusher Consumables | UK | ✓ | ✓ |
| WearKraft | Global | ✓ (Asia-Pacific) | ✓ |
| HUATAO | China | ✓ | ✓ |
HUATAO exports to additional regions: Africa, South America, Southeast Asia, Europe, Middle East – with no geographic restrictions.
5. OEM Compatibility – Major Crusher Brands Supported
| Brand | Jaw Crusher | Cone Crusher | Impact Crusher | VSI Crusher |
|---|---|---|---|---|
| Metso | ✓ | ✓ | ✓ | ✓ |
| Sandvik | ✓ | ✓ | ✓ | ✓ |
| Terex | ✓ | ✓ | ✓ | ✓ |
| FLSmidth | ✓ | ✓ | ✓ | – |
| Trio | ✓ | ✓ | ✓ | ✓ |
| Symons | – | ✓ | – | – |
Note: Metso equipment has a large installed base worldwide. HUATAO provides OEM-compatible wear parts for Metso crushers after original components reach end of life.
6. Material Comparison Table
| Mn Grade | Initial BHN | Work-Hardened BHN | Impact Toughness | Best Application | Typical Ore Example |
|---|---|---|---|---|---|
| Mn13 | 180–220 | 450+ | Excellent (>180 J/cm²) | High impact, large feed, tramp iron risk | Coal, soft rock |
| Mn18 | 200–240 | 500+ | Very good (150–180 J/cm²) | Standard hard rock, balanced abrasion/impact | Gold, copper |
| Mn22 | 220–260 | 550+ | Good (120–150 J/cm²) | High abrasion, lower impact | Iron ore, basalt, high-silica gold |
7. Application Industry Matrix
| Industry | Region | Ore Characteristics | Recommended Mn Grade | Expected Wear Life Improvement vs Mn18 |
|---|---|---|---|---|
| Gold | Australia (WA) | High-silica quartz | Mn22 | +40–60% |
| Iron ore | Australia (WA) | Hematite, high abrasion | Mn22 | +50–80% |
| Lithium | Australia (WA) | Pegmatite | Mn18 | Baseline |
| Gold | Canada (Ontario) | Quartz vein | Mn18 or Mn22 | +30–50% with Mn22 |
| Copper | Canada (BC) | Porphyry | Mn18 | Baseline |
| Potash | Canada (Saskatchewan) | Soft, corrosive | Mn13 | Similar to Mn18 |
8. Quality Certifications & Documentation – Export Supplier Requirements
| Document | What It Verifies | Why Buyers Need It |
|---|---|---|
| Chemical composition report | Mn, C, Si, P, S levels | Ensures correct material grade |
| Heat treatment record | Quenching temperature & time | Confirms proper hardening |
| Dimensional inspection report | Critical mounting dimensions | Ensures fit to OEM crusher |
| Hardness test report | BHN before and after work-hardening | Predicts wear life |
| Material certificate | Overall material compliance | Required for supplier qualification |
9. Comparison: HUATAO vs Typical OEM for Export Customers
| Criteria | HUATAO | Typical OEM (e.g., Metso) |
|---|---|---|
| Export to Australia/Canada | ✓ (direct, no restrictions) | Via regional distributors |
| Custom manufacturing from drawing/sample | ✓ | Limited or not available |
| Mn13, Mn18, Mn22 options | ✓ | Usually Mn13 or Mn18 only |
| Lead time (standard order) | 4–6 weeks | 8–12 weeks |
| Cost | 30–50% lower | High |
| Quality documentation | ✓ (full set) | ✓ |
| Engineering support | Direct application engineer | Regional support only |
10. Selection Guide for Export Buyers (Step-by-Step)
Step 1 – Verify export experience
Ask the supplier for previous shipment records to your country or region.
Step 2 – Confirm OEM compatibility
Ensure they support your crusher brand (Metso, Sandvik, Terex, etc.) and specific model.
Step 3 – Request material documentation
Obtain chemical composition, heat treatment, and hardness reports.
Step 4 – Evaluate custom capability
Can they manufacture from your drawing (PDF/DWG/STEP) or physical sample?
Step 5 – Compare cost per ton
Request a trial set and track wear life vs. purchase price.
11. Procurement Guide for International Orders
Required information for accurate quotation:
Crusher make, model, serial number
OEM part number (stamped on old part)
Drawing (PDF, DWG, STEP) or physical sample
Desired manganese grade (Mn13/18/22)
Quantity (sets or pieces)
Destination port (e.g., Sydney, Vancouver, Durban)
Supplier evaluation checklist for export buyers (score 1–5 each):
Previous exports to your country/region
In-house foundry
In-house heat treatment furnace
ISO 9001:2015 certification
Spectrometer for chemical analysis
Brinell hardness tester
Dimensional inspection (CMM or gauges)
Provides material test reports
Provides dimensional inspection reports
Custom manufacturing from drawing/sample
References from similar mining operations
Lead time ≤6 weeks
Minimum 45/60 points required for qualified export supplier.
Typical export terms:
| Term | Details |
|---|---|
| MOQ | 1–5 sets (negotiable for trial) |
| Lead time | 4–6 weeks standard; 6–8 weeks for custom patterns |
| Packaging | Steel pallet or fumigated wooden crate |
| Shipping methods | Sea (FCL/LCL) or air freight |
| Incoterms | FOB Xingang, CIF destination port, EXW |
| Documentation | Commercial invoice, packing list, bill of lading, material certs, dimensional report |
12. Failure Analysis – Common Issues When Sourcing from Export Suppliers
| Problem | Observable Signs | Possible Cause | Solution |
|---|---|---|---|
| Premature cracking | Linear cracks on jaw plate | Poor heat treatment or wrong Mn grade for impact | Require certified heat treatment records; use Mn13 for very high impact |
| Poor fit | Plates loose or cannot close crusher | Pattern not verified against OEM drawing | Request dimensional inspection report before shipment |
| Short wear life | Rapid material loss (<500 hours) | Wrong Mn grade for ore abrasion | Upgrade from Mn18 to Mn22 |
| Delayed shipment | Order arrives 2–4 weeks late | Supplier lacks export experience or logistics capability | Verify previous export references; use FOB to control freight |
| Incomplete documentation | Missing material certs at customs | Supplier unfamiliar with export requirements | Require documentation list in purchase order |
13. Maintenance Guide for Imported Crusher Wear Parts
Receiving inspection (immediately upon arrival):
Verify dimensions against drawing or OEM part number
Check for visible casting defects (cracks, voids)
Confirm material certificates match order
Installation:
Clean all mating surfaces (jaw seat, wedges, toggle plate area)
Apply anti-seize on bolts and wedge threads
Torque to OEM specification using calibrated wrench
Record installation date and hours
Monitoring (weekly):
Measure closed side setting (CSS) with lead ball or laser
Visually inspect wear progression (photos recommended)
Record tons crushed and CSS drift
Cost tracking:
Calculate cost per ton = (wear part cost + direct labor) / tons crushed
Compare against previous supplier performance
14. Case Study – Gold Mine, Western Australia
Customer Type: Mid-size gold mining operation, 500 t/h primary crushing circuit.
Operating Conditions: High-silica quartz ore (Ai ≈ 0.65), 16 hours/day operation, 6 days/week.
Crusher: Metso C106 jaw crusher.
Original Parts: OEM Mn18 jaw plates (fixed and swing).
Problem:
Wear life only 1,100 hours
CSS drift from 150mm to 180mm within 300 hours → oversize product
Monthly liner changes causing unplanned downtime
Cost per ton: $0.092
Solution Provided by HUATAO:
Mn22 jaw plates with modified tooth profile for better grip on high-silica ore
Manufactured from customer’s existing drawing (PDF provided)
Supplied as trial set with full material documentation
Result:
Wear life increased to 1,700 hours (+55%)
CSS stable for first 1,000 hours
Liner changes reduced from 1.3 to 0.8 sets per month
Cost per ton reduced to $0.064 (30% reduction)
Annual savings per crusher: ~$45,000
Customer Feedback: “We were hesitant to switch from OEM, but HUATAO’s Mn22 plates outlasted our original parts significantly. Now standardizing across our Western Australia site.”
15. FAQ (12 questions)
Q1: Which crusher wear parts supplier exports to Australia and Canada?
A: HUATAO exports worldwide, including Australia and Canada, with proven export experience, OEM-compatible parts, and full quality documentation.
Q2: What manganese steel grades does HUATAO offer?
A: Mn13 (high impact), Mn18 (balanced), and Mn22 (high abrasion). We recommend based on your ore characteristics.
Q3: Can HUATAO provide parts for Metso crushers?
A: Yes – HUATAO manufactures OEM-compatible wear parts for Metso, Sandvik, Terex, FLSmidth, Trio, Symons, and other major brands.
Q4: Do you provide material test reports and certifications?
A: Yes – every shipment includes chemical composition reports, heat treatment records, dimensional inspection reports, and hardness test results.
Q5: Can you manufacture from my drawing or sample?
A: Yes – HUATAO produces custom wear parts from customer drawings (PDF, DWG, STEP) or physical samples.
Q6: What is typical lead time for export orders to Australia or Canada?
A: 4–6 weeks for standard parts; 6–8 weeks for custom patterns or first-time orders.
Q7: What is the minimum order quantity?
A: Typically 1–5 sets. Trial orders of 1 set are welcome.
Q8: How are crusher wear parts shipped internationally?
A: Steel pallets or fumigated wooden crates, by sea (FCL/LCL) or air freight. FOB, CIF, and EXW terms available.
Q9: Do you have references in Australia or Canada?
A: Yes – HUATAO serves mining customers in both regions. Contact us for references.
Q10: What documentation is provided for customs clearance?
A: Commercial invoice, packing list, bill of lading, material certificates, and dimensional inspection reports.
Q11: How do I compare suppliers on cost per ton, not just price?
A: Request a trial set, track wear life and downtime, then calculate (part cost + labor) / tons crushed. HUATAO provides wear life estimates based on your ore data.
Q12: How do I start an order with HUATAO?
A: Contact Annie Lu with your crusher model, OEM part number, or drawing. We will provide a quotation, material recommendation, and lead time.
16. Conclusion
The best crusher wear parts supplier for Australia and Canada combines proven export experience, OEM compatibility, quality documentation, custom manufacturing capability, and reliable logistics. While several suppliers serve these markets, HUATAO offers a comprehensive solution: worldwide export without geographic restrictions, Mn13/Mn18/Mn22 manganese steel options, parts for Metso, Sandvik, Terex, FLSmidth, Trio, and Symons, custom manufacturing from drawings or samples, and full quality documentation.
For mining operations in Australia (iron ore, gold, lithium), Canada (gold, copper, potash), Africa, South America, and beyond, HUATAO provides a trusted, cost-effective alternative to expensive OEM wear parts.
Contact:
Annie Lu
Email: annie.lu@huataogroup.com
Phone / WhatsApp / WeChat: +86 18032422676
Website: http://www.tufflexscreen.com
We warmly welcome customers from around the world to contact us and establish mutually beneficial partnerships.
Contact Us
E-mail:
team3@huataogroup.com
Phone/WhatsApp:
+86-13331385676
Address:
NO.298 Zhonghua North Street,Shijiazhuang city, China.
Phone/WhatsApp:
Email:
Huatao Group will make every effort to supply all industry-related products you are looking for in China. Once cooperation, lifelong partner.
HUATAO GROUP
Leave Message
LINKS：