language

HUATAO GROUP
News & Events

We Help Customers To Meet The Great Challenges Of Our Time.

VIEW PRODUCTS
scroll down

Back to Overview

Overband Magnet or Magnetic Pulley at the Head End: Which One Actually Protects an Aggregate Crusher?

Nov 17,2026

Overband Magnet or Magnetic Pulley at the Head End: Which One Actually Protects an Aggregate Crusher?

Key Takeaways

  • ✔ An overband magnet works from the top of the burden downwards; a magnetic pulley only works on iron that is close to the belt surface.
  • ✔ A magnetic pulley typically costs 40–60% less than a comparable self-cleaning overband, but its effective capture depth is limited to roughly 50–100 mm of aggregate.
  • ✔ Overband installation usually fails on structure and headroom, not on magnetics — 500–700 mm of clear space plus a discharge chute is mandatory.
  • ✔ Splitter plate position decides product loss on a pulley installation as much as field strength decides capture.
  • ✔ Steel-cord belts short-circuit the pulley field and are a poor match for magnetic pulleys.
  • ✔ Neither technology sees manganese steel, stainless or aluminium; a metal detector with a belt-stop interlock covers that gap.
  • ✔ At 180 mm burden on a 1,000 mm belt, the overband is almost always the correct specification regardless of price.
  • ✔ The cheapest total cost of ownership often comes from a pulley at a clean, thin-burden transfer point plus an overband on the dirty primary feed.

Summary Table

Feature

Self-Cleaning Overband Magnet

Magnetic Head Pulley

Mounting position

Suspended above the belt, at the head end or mid-span

Replaces or sits inside the head pulley at the discharge

Capture mechanism

Lifts ferrous pieces up out of the burden

Holds ferrous pieces against the belt past the normal trajectory

Effective burden depth

150–300 mm depending on field and gap

Roughly 50–100 mm in practice

Iron discharge

Cleated belt carries iron sideways into a chute

Iron drops behind a splitter into a reject chute

Headroom required

500–700 mm above the belt plus chute

None above the belt

Power demand

0.75–2.2 kW drive (permanent); 5–12 kW/m width (electromagnetic)

Zero — passive permanent magnet

Indicative capital cost, 1,000 mm

US$18,000–35,000 plus frame

US$6,000–14,000

Best fit

Deep burden, high tonnage, heavy iron load

Thin even burden, tight headroom, pulley replacement due

Main weak point

Structure, headroom, discharge chute plugging

Shallow reach, splitter sensitivity, lagging wear

Market Watch: What Late-2026 Metal Prices Mean for Crusher Protection Budgets

Crusher protection is a capital decision, and capital decisions in November 2026 are being made against a very uneven metal price board. LME three-month copper traded near US$13,673/t on 10 November, having touched an all-time high of US$14,875/t on 10 September, with the Shanghai Yangshan premium at a record US$230/t — a signal that copper concentrate and cathode are still being pulled hard into the market, partly by data-centre and grid demand. Iron ore told the opposite story: Singapore futures for 62% fines slid to about US$90.70/t on 12 November, the fourth consecutive session of losses, as Chinese steel output expectations softened into the heating-season restrictions. Spot gold, meanwhile, fell to a one-year low near US$3,878/oz before recovering to roughly US$3,900/oz, and one major bank cut its end-2026 gold forecast to US$4,150/oz, with silver holding near US$49–50/oz.

Read those three numbers together and the procurement message is clear. Aggregate and industrial-mineral producers are not enjoying a price tailwind: with iron ore near US$90/t, every unplanned stop has to be absorbed inside a thinner margin. Copper at US$13.7k/t means copper projects keep ordering crushing capacity, and those projects can justify deeper-field magnets on day one. Gold at US$3,900/oz is off its peak but still historically strong, so gold plants keep running flat out and keep buying protection. In all three cases the same discipline applies: the magnet has to be sized against a measured burden depth and a measured iron load, because a mismatch costs more than the price difference between an overband and a pulley. That is the argument this article builds.

Where Does Tramp Iron Actually Enter an Aggregate Crushing Circuit?

Tramp iron in a quarry does not arrive from one place; it arrives from six, and the entry point determines which magnet can see it.

From the face. Drill bits, button tips, coupling sleeves and wire from presplit lines enter with the shot rock and stay buried in the primary feed. These are the pieces that crack a Jaw Crusher jaw plate or wedge a chamber.

From the loading fleet. Bucket teeth, tooth adapters, pins, cutting edges and GET hardware snap off at the face or on the stockpile and are shovelled straight into the hopper.

From the plant itself. Liner bolts, breaker tool tips, hammer pins, screen cloth fragments and mesh wire shed from vibrating screens upstream and circulate with the product.

From maintenance. Welding rod stubs, spanners, angle-grinder discs and offcuts are the classic post-shutdown contamination. A plant that has just finished a liner change is statistically the most dangerous plant on site.

From the feed stock itself. Recycled concrete brings rebar and mesh; asphalt millings bring wire and bucket teeth; slag brings metallic lumps that are only partly magnetic.

From wear. Manganese liner fragments are weakly magnetic and get progressively harder to capture as they work-harden, which is why the first question in any Crusher Wear Parts & Liners failure review is always "what did the magnet catch in the month before?"

The practical consequence is that iron arrives both on the surface of the burden and buried inside it. A device that only reads the surface captures a fraction of the risk — and that single geometric fact is the whole overband-versus-pulley debate in one sentence.

Conclusion

The overband-versus-pulley question is not a brand question or a budget question; it is a measurement question. A magnetic pulley is an elegant, passive, inexpensive device that removes surface iron beautifully — and it cannot see through 180 mm of granite. A self-cleaning overband reaches into the burden, discharges continuously and costs two to three times as much, and on a deep-bed primary feed it is the only one of the two that does the job.

So measure the burden, count the iron, check the headroom and the head pulley, then choose. Where the burden is thin and the belt is fabric, buy the pulley and spend the savings on a metal detector. Where the burden is deep, the belt is steel-cord or the crusher behind it is expensive to stop, buy the overband and design the chute properly. And on any plant with more than one iron pathway, use both — the cheapest protection is usually the device that matches the geometry of the conveyor it sits on, not the device with the biggest magnet.

Technician inspecting conveyor head-end components at an aggregate plant during a maintenance shift

Related Articles

Related Products

  • Self-Cleaning Electromagnetic Separator
  • Electromagnetic Overband Separator
  • Magnetic Drum
  • Magnetic Roller
  • Iron Magnet
  • Magnetic Drums & Rollers

Related Technical Guides

  • Improve Fine Screening Efficiency with Polyurethane Screen Panels
  • Hydrocyclone Wear: Root Causes, High-Wear Zones & Material Solutions
  • Hydrocyclone Underflow Too Wet? 6 Causes & Fixes
  • Flotation Cell Rotor and Stator Wear Parts: How They Control Recovery, Flow and Maintenance Cost
  • Rotor & Stator in Mechanical Flotation Cells: The Heart of Efficient Mineral Flotation

Related Buyer Guides

  • Which Manufacturer Offers High-Quality Polyurethane Tufflex Wire Screens for Mining?
  • How Do I Choose the Right Rubber Belt for a Vacuum Belt Filter?

Related Comparison Guides

  • Polyurethane Screen vs Rubber Screen vs Wire Mesh: A Complete Comparison Guide
  • Self-Cleaning Screen vs Traditional Woven Wire Mesh: Which One Should You Choose?

Contact Us

Contact: Annie Lu

Email: annie.lu@huataogroup.com

Phone / WhatsApp: +86 180 3242 2676

Website: http://www.tufflexscreen.com

We warmly welcome customers from around the world to contact us and establish mutually beneficial partnerships.