language

HUATAO GROUP
News & Events

We Help Customers To Meet The Great Challenges Of Our Time.

VIEW PRODUCTS
scroll down

Back to Overview

Sectional Screw Flights vs. Continuous Screw Flights: Which Should You Choose?

Nov 17,2026

Sectional Screw Flights vs. Continuous Screw Flights: Which Should You Choose?

Selecting a screw flight is both a component-design decision and a manufacturing decision. Sectional and continuous flights can be used in screw conveyors, augers and other helical conveying equipment, but their construction affects material thickness, fabrication sequence, joints, replacement planning and production economics.

1. Construction and Forming Principles

A sectional flight is produced from plate. The blank is cut to the required annular geometry, prepared for forming and shaped into a helical segment. Individual segments are then aligned and joined to create the required length. Each segment-to-segment joint needs suitable fit-up and welding control. The flight is subsequently attached to the shaft or tube according to the design.

A continuous flight is produced by forming strip or coil into a helix. Cold rolling and mould winding are two distinct routes. Cold rolling progressively develops the helix through shaped forming elements and may work-harden the material. Mould winding shapes the strip around a winding tool or mandrel. The resulting section profile and dimensional limits depend on the process and tooling.

The difference is important for machine buyers. A hydraulic sectional forming machine is intended for individual plate segments. A continuous cold-rolling machine and a winding machine produce continuous flighting by different methods. The machine type should follow the finished flight drawing.

2. Material Thickness and Wear

Sectional flighting is often selected for heavier plate sections because its thickness can remain relatively uniform across the flight width. Cold-rolled helicoid flighting commonly becomes thinner toward the outer edge as the strip is formed. This is not a universal quality ranking: the correct profile depends on the design duty, material and equipment range.

For abrasive conveying, review the particle size and hardness, conveying velocity, loading, screw speed, clearances and expected wear location. A thicker sectional plate may provide a larger wear allowance, but it also adds mass and can increase forming, handling and drive requirements. For corrosive or hygienic applications, material grade, surface finish, cleaning method and fabrication quality may be more important than construction alone.

Material grade cannot be selected by a generic “steel” description. Carbon steel, stainless steel, alloy steel and abrasion-resistant grades have different ductility, hardness and forming behavior. The supplier needs the actual grade and thickness to assess tooling and process suitability.

3. Dimensional and Geometry Considerations

A complete screw flight specification includes outside diameter, inside diameter, pitch, thickness, flight height, handedness and finished length. Depending on the design, the buyer may also need to specify root and tip thickness, helix angle, edge features, segment count, shaft diameter, tube diameter and joint preparation.

OD alone is not enough to select a machine. A continuous forming machine may accept a certain strip width and thickness but not the required combination of ID, OD and pitch. A sectional press may form a particular blank size only when the die, cylinder force and workpiece material are within the approved range. The supplier should confirm the complete working envelope, not a single headline dimension.

4. Production, Welding and Quality Control

Sectional production includes blank cutting, segment forming, fit-up, joining, attachment to the shaft and inspection. The joining process can influence pitch, alignment and distortion. Use a defined welding procedure and inspection plan appropriate to the drawing and material. Record dimensions before and after welding where those measurements are part of the acceptance criteria.

Continuous production removes the need for segment-to-segment joining along the flight body, but it still requires strip preparation, forming, cutting to length, attachment to the shaft and inspection. For cold-rolled flighting, measure the thickness profile at defined points. For either route, inspect OD, ID, pitch, runout or alignment as specified by the design.

5. Production Volume and Total Cost

For mixed custom orders, sectional forming may be attractive because it can accommodate a variety of plate-based geometries, provided the tooling and machine capacity are suitable. The cost model must include cutting, scrap, forming, segment joining, welding, handling and inspection. Frequent changes in dimensions can increase setup and tooling costs.

For stable repeat orders, continuous forming may provide a more streamlined process when the product fits the machine range. Include strip utilization, coil handling, tooling, setup, forming rate, cut-to-length, shaft attachment and inspection. A dedicated continuous route may be less attractive if the workshop has many short runs and frequent changes.

Compare accepted parts per labor hour and cost per accepted flight. Include energy, maintenance, spare parts, operator training, downtime, floor space, quality losses and the cost of holding multiple tooling sets. Avoid relying on advertised maximum output without testing the target material and geometry.

6. Equipment Routes and Internal Product References

For sectional plate segments, evaluate the Spiral Blade Forming Machine. For continuous cold-rolled helicoid production, evaluate the Continuous Screw Flight Cold Rolling Machine. For mould-wound continuous flighting, review the Winding Spiral Blade Forming Machine. These links represent different equipment routes; they are not interchangeable machine recommendations.

7. Maintenance and Replacement

Replacement strategy should be considered before the conveyor is installed. Sectional segments may be practical where the screw can be accessed and the segment can be safely removed and replaced. Continuous flight may be suitable where a complete flight length can be handled as one assembly. Actual access, shaft design, casing dimensions and approved repair procedures determine feasibility.

Monitor wear patterns rather than relying on a generic service-life claim. Record the location and depth of wear, operating conditions, conveyed material and inspection date. For forming equipment, inspect dies, rolls, moulds, hydraulic components, guards and controls according to the machine manual. Isolate energy before maintenance and never bypass safety devices.

8. RFQ and Supplier Evaluation

Provide the latest drawing revision and identify critical dimensions.

State material grade, thickness and any hardness or wear requirements.

Identify sectional or continuous construction and the preferred forming route, if known.

Specify OD, ID, pitch, thickness profile, hand, length and segment/joint details.

Describe the application, conveyed material and operating conditions.

State batch quantity, annual volume and expected product mix.

Agree on inspection points, tolerances and sample acceptance criteria.

Request a written list of machine limits, tooling, accessories and optional equipment.

Confirm operation manuals, training, spare parts, service response and warranty scope.

Technical FAQ

Does sectional flight always have constant thickness?

Sectional plate construction can provide a relatively uniform thickness through the flight section, but actual thickness depends on the blank and forming design. Confirm the finished section against the drawing and measure it at agreed locations.

Does cold rolling change material properties?

Cold forming can work-harden material in the formed region. The amount and effect depend on material grade, initial condition, deformation and process. Do not assume a specific hardness increase without test data.

Is a continuous flight always more accurate?

No universal accuracy ranking applies. Accuracy depends on machine condition, tooling, material consistency, setup, measurement and operator method. Define the required tolerance and request evidence from a representative trial.

Can sectional flighting be made in wear-resistant steel?

Some wear-resistant grades may be considered for sectional plate forming, but their hardness and ductility can affect forming loads and crack risk. Confirm the exact grade, thickness, blank preparation and machine capability before production.

Can continuous flighting be replaced in sections?

A repair may be possible in some designs, but it depends on access, joint design, shaft condition and the approved repair procedure. The original construction does not alone determine the maintenance method.

The correct selection is a coordinated decision between the conveyor design, material specification, forming process and workshop economics. A drawing-based review and a representative trial provide a stronger basis than a general claim that one flight type is always superior.

Contact HUATAO

Email: Lucy.chai@huataogroup.com

Tel / WhatsApp / WeChat: +86 153 7388 3537

WhatsApp: https://wa.me/15373883537

Website: https://www.refinerdisc.com/

Contact page: Contact HUATAO

PREVIOUS: