Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Galician
AfrikaansHow to Choose Between Blind-Drilled and Grooved Press Rolls for Better Paper Machine Dewatering
Nov 18,2026
In modern papermaking, the press section plays an important role in determining sheet dryness, production efficiency, and downstream drying energy consumption.
The press roll surface design directly influences how water is handled during nip compression. Among the commonly used solutions, blind-drilled press rolls and grooved press rolls provide different approaches to increasing the available water-handling volume.
Grooved press rolls often offer higher dewatering potential because their continuous channels provide pathways for water evacuation. Blind-drilled rolls, however, remain useful in applications where softer covers and specific water-holding characteristics are required.
For paper machine engineers, the correct decision requires more than comparing the appearance of two roll surfaces. The complete press system, including cover material, nip loading, press felt, paper grade, and machine speed, must be considered.
1. Understanding the Two Press Roll Designs
Blind-drilled press rolls
Blind-drilled press rolls feature numerous small holes distributed across the surface covering.
Unlike through-drilled suction rolls, blind holes do not extend through the entire roller shell.
During the pressing process, the wet paper web passes through the nip between the press rolls and felt. Mechanical compression forces water into the felt and the available cavities in the blind-drilled cover.
The water collected in these cavities must then be evacuated after the roll leaves the nip.
Important design parameters include:
Hole diameter.
Hole depth.
Hole spacing.
Drilling pattern.
Open area.
Void volume.
Cover hardness.
Cover thickness.
One important advantage is that blind-drilled designs can be used with certain softer roll covers.
However, the hole pattern must be designed carefully to prevent undesirable pressure variations, sheet marking, and inefficient water removal.
Grooved press rolls
Grooved press rolls use continuous channels on the working surface.
These channels provide pathways for expressed water to move away from the press nip.
The drainage performance depends on groove geometry and the ability of the cover to maintain its designed shape during compression.
Important parameters include groove depth, groove width, pitch, spacing, direction, open area, and total void volume.
A well-designed grooved roll can provide effective nip water removal, especially in applications where high dewatering capacity is required.
2. Why Do Grooved Press Rolls Often Have Higher Dewatering Potential?
The main difference is the water-transport mechanism.
Blind-drilled rolls temporarily store water in individual cavities.
Grooved rolls provide continuous drainage channels that can help transport water away from the nip.
This difference can make grooved rolls particularly attractive for press positions with demanding water-handling requirements.
Nevertheless, the final performance depends on several factors.
Void volume and open area
Both determine the available space for water handling.
A higher open area does not automatically guarantee higher sheet dryness. The geometry must provide adequate drainage without compromising mechanical strength or pressure distribution.
Cover hardness and deformation
The covering material must withstand repeated nip compression.
If the grooves close under pressure, their effective drainage capacity decreases.
Polyurethane covers are often considered for demanding grooved applications because of their mechanical strength and resistance to deformation.
Rubber covers can remain appropriate for selected blind-drilled applications where compliance and specific surface characteristics are important.
Nip pressure and dwell time
Nip loading influences the amount of water expressed from the sheet.
The interaction between line load, nip width, cover hardness, and machine speed determines the actual pressing conditions.
Press felt performance
The press felt is responsible for receiving and transporting a substantial amount of water.
Permeability, compression recovery, contamination, and water-handling capacity should therefore be reviewed together with roll surface design.
3. How to Select the Right Design for Different Paper Grades
The appropriate roll design depends on the paper machine and the specific press position.
Printing and writing paper
Sensitive paper grades require attention to sheet marking, moisture uniformity, and surface quality.
Blind-hole diameter and spacing must be selected carefully, while grooved designs must provide adequate drainage without creating undesirable sheet defects.
Kraft paper and linerboard
These grades may have demanding water-removal requirements depending on basis weight, furnish, and press configuration.
Grooved press rolls can be worth evaluating where greater nip water-handling capacity is needed.
Tissue paper
Tissue production requires particular attention to bulk, softness, sheet integrity, and moisture profile.
The choice between surface designs must account for the sensitivity of the sheet and the characteristics of the press arrangement.
Recycled paper grades
Recycled furnish may contain fillers and contaminants that influence felt condition and roll-surface cleanliness.
Hole and groove maintenance should be included in the selection and maintenance plan.
There is no universal roll design that provides the best results for every paper grade.
4. How Can Paper Mills Improve Press Dewatering Performance?
Changing the roll surface alone may not solve every dewatering problem.
A systematic review should include the following areas.
Roll surface inspection
Check groove closure, blocked blind holes, uneven wear, surface contamination, and cover deterioration.
Press felt condition
Review permeability, contamination, compaction, and water-handling performance.
Nip pressure profile
Check pressure distribution across the machine width. Uneven loading can result in moisture-profile problems even when the roll surface is properly designed.
Cover material
Evaluate rubber or polyurethane according to hardness, mechanical strength, temperature, and chemical compatibility.
Water evacuation
Check doctoring, centrifugal drainage, suction arrangements where applicable, and water carryover.
Machine performance
Monitor press exit solids, sheet moisture profile, sheet breaks, and downstream dryer-section demand.
A controlled engineering trial can help establish whether changing the roll surface will provide a measurable operational benefit.
5. HUATAO Press Roll Solutions for Paper Machines
HUATAO provides industrial roller solutions for papermaking and other industrial applications.
The HUATAO Suction Press Roll is designed for press-section applications requiring effective water removal and mechanical web handling.
The Paper Machine Roller Category also covers related products, including suction couch rolls, suction pickup rolls, and suction touch rolls.
For customers reviewing roll-cover materials, the Paper Machine Roll Covers resource discusses rubber, polyurethane, ceramic, and other covering options.
When requesting a customized press roll, buyers should prepare:
Paper machine manufacturer and model.
Press-section arrangement.
Paper grade and basis weight.
Operating and maximum machine speed.
Nip line load.
Roll diameter and working length.
Existing surface pattern.
Cover material and hardness.
Press felt specifications.
Current press exit solids.
Known dewatering problems.
Required dimensional and inspection tolerances.
This information helps suppliers understand the operating requirements and identify the appropriate technical solution.
6. Frequently Asked Questions
Q1. Which press roll has better dewatering efficiency?
Grooved press rolls often provide greater dewatering potential because their continuous channels support water movement away from the nip. However, actual performance depends on the complete press system.
Q2. What is the main function of blind holes?
Blind holes provide temporary cavities for receiving water expressed during nip compression. The collected water must subsequently be evacuated.
Q3. Why are grooves sometimes preferred for high dewatering applications?
Their continuous channels provide water drainage pathways and can support higher water-handling capacity when correctly designed.
Q4. Can blind-drilled rolls be manufactured with polyurethane covers?
Yes. The design must be evaluated according to cover properties, hole geometry, operating conditions, and application requirements.
Q5. What happens when press roll grooves become blocked or closed?
Effective water-handling capacity can decrease. This may contribute to reduced dewatering performance and unstable press-section operation.
Q6. Does press felt selection affect roll performance?
Yes. Felt permeability, compression recovery, and water-handling capacity directly influence how effectively the expressed water is transported away from the web.
Q7. Can a grooved press roll reduce dryer energy consumption?
Improved press dewatering can reduce the water entering the dryer section, potentially lowering drying demand. Actual savings depend on the paper machine and operating conditions.
Q8. How do I specify a replacement press roll?
Provide machine speed, paper grade, basis weight, roll dimensions, nip loading, existing surface design, cover material, and felt information. Drawings and operating records are especially useful.
Conclusion
Blind-drilled and grooved press rolls both contribute to effective water management in paper machine press sections.
Grooved designs often provide greater dewatering potential through continuous drainage channels, while blind-drilled designs remain useful for specific applications requiring distributed water-holding volume and softer covers.
The best solution depends on paper grade, machine speed, nip pressure, cover strength, felt performance, and the complete press configuration.
HUATAO welcomes paper mills and industrial customers worldwide to discuss their customized paper machine roller requirements.
Related Products and Resources
Contact HUATAO
Tony Liu | International Department
Mobile / WhatsApp / WeChat: +86 13383112591
Email: sale08@huataogroup.com
Website: https://www.huataorolls.com/
We warmly welcome paper mills, paper machine manufacturers, industrial distributors, and maintenance teams from around the world to contact HUATAO and establish mutually beneficial partnerships.
Contact Us
E-mail:
team3@huataogroup.com
Phone/WhatsApp:
+86-13331385676
Address:
NO.298 Zhonghua North Street,Shijiazhuang city, China.