Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Galician
Afrikaans-
Website Group
We Help Customers To Meet The Great Challenges Of Our Time.
VIEW PRODUCTSHow Do I Size a Self-Cleaning Suspended Magnet for a 1,200 mm Conveyor at 800 t/h?
Nov 19,2026
Market Watch: What Is Pressing on Wear and Protection Budgets Right Now
Copper held near four-month lows on the London Metal Exchange at about $13,226 per tonne on 17 November, yet the physical market stays tight: Shanghai copper inventories fell 18.3% week-on-week to 27,600 tonnes while LME stocks rose 3.9% to about 329,100 tonnes. Gold slipped to $3,849 per ounce — a weekly drop of 4.7% on COMEX — and investment banks still project central-bank buying to lift prices toward $4,650 per ounce by the end of 2027. Iron ore ticked down to $90.08 per tonne on the Singapore Exchange, and nickel rallied 3.8% to $16,462 per tonne.
For plant operators the message is mixed: metal prices are softening short term, but equipment and wear-part markets keep expanding on volume. The heavy-duty conveyor belt market is projected to grow from $5.76 billion in 2026 to about $7.0 billion by 2035, with mining taking an estimated 43% of demand and Asia-Pacific around 44%. Industrial-rubber analyses put mining and quarrying demand growth at 4.65% per year, and note that polyurethane continues to substitute rubber in the most abrasive duties. In Asia, mining material-handling equipment demand is expected to grow 5–8% annually through 2035, with conveying systems representing 30–45% of equipment value.
The practical consequence for a 1,200 mm, 800 t/h line is simple: every tonne of throughput is valuable, and a single piece of tramp iron through a primary crusher costs more than the magnet that should have caught it. Sizing that magnet correctly is cheap insurance in both directions of the commodity cycle.
What Is a Self-Cleaning Suspended Magnet and Where Does It Sit in the Circuit?
A self-cleaning suspended magnet — usually called an overband or cross-belt separator — is a permanent or electromagnetic block hung above a conveyor belt, wrapped in its own short motor-driven belt that continuously carries captured iron out of the field into a side chute. It sits in the conveying stage of the mineral processing chain, and its job is to intercept ferrous steel before it reaches crushing or screening equipment. Position it over the head pulley for the strongest capture, or cross-belt over the inclined run where headroom allows.
In a typical circuit the magnet protects the line between Belt Conveyors and the primary crusher: ore leaves a bin or feeder, travels under the suspended unit, and any bolt, drill steel or liner fragment riding the burden is lifted into the discharge chute. What survives the magnet meets the Jaw Crusher or Hydraulic Cone Crusher — machines whose jaw plates and mantles are exactly the parts tramp iron destroys. That is why magnet sizing and Crusher Wear Parts budgets are two lines of the same spreadsheet.
The equipment family itself is broader than one machine. HUATAO supplies the full Magnetic Separators range, from the Iron Magnet plate units to the Electromagnetic Overband Separator and the Self-Cleaning Electromagnetic Separator used on deep-burden, high-tonnage conveyors, plus downstream Magnetic Drum and roller units for product purification. Sizing the suspended unit correctly keeps the whole family working as designed.

Case Study
Customer Type: Iron ore mine, primary crushing line.
Ore Type: Crushed hematite, ~2.0 t/m³ loose, 150 mm top size.
Operating Conditions: 1,200 mm belt, 800 t/h, 2.0 m/s, measured bed 95–120 mm, 24/7 operation.
Problem: The existing ferrite unit was specified by belt width alone, with a face equal to the belt and a gap drifted to 420 mm after a gantry modification. Capture of 0.5–1 kg steel was visually under half; the cone crusher absorbed two tramp-iron events a year, each costing liner damage and 10–14 hours of downtime.
Solution: Resized by the six gates: 1,400 mm rare-earth self-cleaning unit, rated 350 mm gap with ≥70 mT, 4 kW drive, 50–60° lined discharge chute, acceptance gauss survey written into the purchase order, suspension redesigned for 2× static load.
Result: Verified capture of the 0.5 kg target at bed bottom rose from roughly 55% to above 95% in a test-piece audit; crusher tramp-iron events fell from two per year to zero across 14 months; collected steel averaged 260 kg per day, confirming the 0.01–0.03 kg/t estimate used for sizing. Downtime avoided was conservatively valued at more than ten times the magnet replacement cost in the first year.

Contact Us
Contact: Annie Lu
Email: annie.lu@huataogroup.com
Phone / WhatsApp: +86 180 3242 2676
Website: http://www.tufflexscreen.com
We warmly welcome customers from around the world to contact us and establish mutually beneficial partnerships.
PREVIOUS:
Contact Us
E-mail:
team3@huataogroup.com
Phone/WhatsApp:
+86-13331385676
Address:
NO.298 Zhonghua North Street,Shijiazhuang city, China.
Phone/WhatsApp:
Email:
Huatao Group will make every effort to supply all industry-related products you are looking for in China. Once cooperation, lifelong partner.
HUATAO GROUP
Leave Message
LINKS: