language

HUATAO GROUP
News & Events

We Help Customers To Meet The Great Challenges Of Our Time.

VIEW PRODUCTS
scroll down

Back to Overview

What Causes Cracks, Delamination, or Swelling in Rubber-Covered Paper Machine Rolls?

Nov 19,2026

What Causes Cracks, Delamination, or Swelling in Rubber-Covered Paper Machine Rolls?

Introduction

Rubber-covered rolls are used in different positions throughout paper production and converting equipment. Depending on the application, they may be exposed to continuous nip pressure, repeated deformation, process water, chemicals, elevated temperatures, and contact with paper or machine clothing.

These operating conditions can gradually change the cover's surface condition and mechanical properties. In more serious cases, the cover may crack, separate from the underlying layer, or swell.

For maintenance teams, identifying the type of damage is the first step toward choosing the correct solution. A surface crack does not necessarily indicate bonding failure, while a swollen cover does not automatically mean that the rubber compound has reached its normal wear limit.

This article explains the main failure mechanisms, inspection methods, and maintenance considerations for rubber-covered paper machine rolls.

1. Rubber Roll Cover Cracking: Mechanical Fatigue, Impact and Heat

Cracks can develop when the cover experiences repeated stress or exposure to conditions beyond its intended operating range.

Mechanical fatigue and nip loading

During operation, the roll cover is repeatedly compressed and released as it passes through the nip. Excessive loading, uneven pressure distribution, or unsuitable roll crown may increase local stress.

Fatigue cracks that run parallel to the roll axis can indicate a crowning or loading problem. Their location should be compared with the nip impression and measured roll profile.

A roll may also develop abnormal stress when the loading mechanism, bearing support, or mating roll is not operating correctly.

Impact damage from paper wads

A paper wad or foreign object passing through the nip can create sudden impact stress. The resulting cracks are often irregular and concentrated in a localized area.

This type of damage should be distinguished from gradual fatigue cracking. The maintenance team should investigate the event that caused the impact, including web breaks, felt problems, and material accumulation.

Heat-related damage

Excessive surface temperature can accelerate the deterioration of an elastomer cover. Localized hot spots may be associated with uneven loading, friction, cooling problems, or abnormal operating conditions.

The roll's temperature profile should be compared across the working face and against its normal operating baseline.

Storage and handling damage

Cracking can also occur before a roll enters service. Ozone exposure, unsuitable storage near electrical motors, oil contamination, direct sunlight, cold impact, and improper lifting may damage the cover.

Correct storage and handling are therefore part of roll cover life management, not merely logistics procedures.

2. Rubber Roll Cover Delamination: Why Does Bonding Fail?

Delamination is a more serious type of damage because it involves the separation of bonded layers.

A rubber-covered roll may consist of a metal shell, a prepared bonding surface, one or more bonding or base layers, and the outer cover compound. Adhesion must remain stable under the mechanical and environmental conditions of the application.

Possible causes of delamination include:

Inadequate preparation of the metal surface.

Incorrect bonding materials.

Unsuitable curing conditions.

Water or process liquid entering the bond line.

Excessive thermal gradients.

Chemical deterioration of the bonding system.

Mechanical impact or abnormal nip loading.

Cover selection that does not match the operating conditions.

Water ingress and internal cooling

For rolls using internal water cooling, the temperature relationship between the roll body, cover, and process environment should be considered.

A temperature gradient can encourage water migration through the cover. If water reaches the bonding interface and accumulates, adhesion may deteriorate.

The result can be localized separation or sudden debonding rather than normal gradual wear.

How can delamination be recognized?

Possible warning signs include blisters, raised areas, localized temperature changes, unusual vibration, changes in operating sound, and abnormal cover movement.

However, external appearance alone cannot confirm the extent of internal damage.

A roll with suspected significant delamination should be removed from service for specialist evaluation. Continuing operation may increase the damaged area and create an equipment reliability risk.

3. Rubber Roll Cover Swelling: Chemical Compatibility Matters

Swelling is often associated with the absorption of liquids or chemical reactions that change the properties of the cover compound.

Different rubber and polyurethane formulations have different chemical resistance. A cleaning agent that is acceptable for one cover material may cause softening or swelling in another.

Potential sources of chemical exposure include:

Process chemicals.

Cleaning solvents.

Petroleum-based products.

Oils and lubricants.

Shower additives.

Maintenance chemicals.

Residues from previous production conditions.

The symptoms may include increased diameter, reduced hardness, sticky or oily surface conditions, blistering, and changes in wear resistance.

Water absorption may also contribute in certain cover systems. The effect depends on the compound, temperature, exposure time, and cover structure.

When swelling occurs, the investigation should include all substances that contact the roll, not only the chemicals used in the main production process.

4. How Cover Failure Affects Paper Machine Operation

Cracks, delamination, and swelling can influence more than the roll surface itself.

A damaged cover may produce:

Changes in nip contact.

Uneven pressure distribution.

Abnormal roll vibration.

Surface marking or contamination.

Unstable dewatering or sheet handling.

Increased maintenance frequency.

Unexpected downtime.

A greater risk of further damage to the roll.

The actual effect depends on the roll position and severity of the defect.

For example, a small superficial mark on one application may have a different operational significance from a blister or suspected bonding failure on a heavily loaded press roll.

Maintenance decisions should therefore consider the roll's function, operating speed, loading, cover specification, and machine condition.

5. Inspection and Root Cause Analysis

A useful inspection should combine surface observation with measurements and operating history.

Visual inspection: Record crack direction, location, length, blistering, discoloration, roughness, and evidence of separation.

Hardness testing: Measure the cover at several axial positions. Compare the results with the original specification and previous inspection data.

Diameter and profile measurement: Check diameter, crown, and surface profile to identify swelling, uneven wear, or deformation.

Temperature monitoring: Review the temperature distribution across the working face and investigate abnormal changes.

Chemical review: Record the process chemicals, cleaning agents, oils, and solvents that may contact the roll. Confirm material compatibility before changing the chemical program.

Bonding assessment: If delamination is suspected, arrange a specialist inspection to assess the cover, bonding layers, and roll shell.

Operating history: Review nip loading, machine speed, temperature, cooling conditions, web breaks, felt events, and maintenance records.

The combination of these findings is more reliable than selecting a repair method based on visual appearance alone.

6. Repair or Replace: How Should Maintenance Teams Decide?

The maintenance strategy should match the type and extent of damage.

Grinding: Suitable when the damage is limited to the surface, the cover remains bonded, and sufficient material is available within the required dimensional limits.

Recoating: May be considered when the cover has deteriorated beyond normal grinding limits or has sustained significant damage.

Bonding repair or complete recoating: Requires assessment of the affected interface and roll body. The feasibility depends on the extent of adhesion loss and the condition of the underlying structure.

Replacement: Should be considered when the roll has extensive damage, uncertain structural integrity, excessive deformation, or repair requirements that are uneconomical.

Before repair, confirm the roll drawing, cover material, hardness, cover thickness, diameter, working face length, crown, surface finish, and applicable tolerances.

A replacement cover should also be selected according to the actual operating environment rather than simply copying the previous material specification without reviewing the cause of failure.

7. Preventive Maintenance and Cover Life Management

A practical prevention program should combine correct cover selection with regular inspection and operating control.

Recommended actions include:

Confirm chemical compatibility before introducing new cleaning agents or process chemicals.

Monitor roll surface temperature and investigate localized hot spots.

Check nip pressure distribution and roll crown.

Maintain suitable cooling and shower conditions.

Prevent paper wads and foreign objects from passing through the nip.

Inspect cover condition during planned shutdowns.

Record hardness, diameter, crown, and repair history.

Store rolls on their journals and protect the cover from impact, ozone, and chemical contamination.

For more technical information about cover materials, read Paper Machine Roll Covers: Rubber, Polyurethane, Ceramic & Tungsten Carbide.

8. Paper Machine and Corrugating Roll Applications

Different paper-related applications require different roll designs, cover specifications, and inspection criteria.

For information about paper machine geometry and roll calibration, see Why Does Forming Section Roll Matrix Calibration Standardize Sheet Uniformity in Modern Paper Machines?.

Corrugated board production uses a different roll system. How Does Custom Corrugating Roll Flute Design Maximize Board ECT While Cutting Paper Take-Up Costs? discusses the role of flute design in corrugating applications. Corrugating rolls should not be treated as interchangeable with rubber-covered paper machine rolls.

9. HUATAO GROUP Industrial Roller Supply Solutions

HUATAO GROUP provides industrial roller supply solutions and technical coordination for paper, packaging, and related industries.

For replacement and customized roller projects, we can review drawings, dimensions, equipment specifications, cover requirements, and operating conditions to evaluate a suitable supply approach.

Visit HUATAO Rolls for product and company information. Learn more about the company through About HUATAO, explore Other Industrial Rolls, and find technical updates in our News section.

Conclusion

Cracks, delamination, and swelling are distinct forms of rubber roll cover failure. Mechanical fatigue, impact, thermal stress, chemical incompatibility, water ingress, bonding problems, and unsuitable storage can all contribute.

A reliable diagnosis should combine visual inspection, hardness and diameter measurements, temperature monitoring, chemical compatibility review, and bonding assessment.

Identifying the original cause before grinding, recoating, or replacing the roll helps reduce recurring damage and supports more stable paper machine operation.

Related Products & Resources

Paper Machine Roll Covers

Paper Machine Rolls

Corrugating Rolls

Other Industrial Rolls

Contact Information

Tony Liu
General Manager | International Department
Mobile / WhatsApp / WeChat: +86 13383112591
Email: sale08@huataogroup.com
Website: https://www.huataorolls.com/

PREVIOUS: