language

HUATAO GROUP
News & Events

We Help Customers To Meet The Great Challenges Of Our Time.

VIEW PRODUCTS
scroll down

Back to Overview

What Is the Ideal SiO₂ Purity for Fused Silica Ceramic Rollers Used in Glass Tempering?

Nov 16,2026

What Is the Ideal SiO₂ Purity for Fused Silica Ceramic Rollers Used in Glass Tempering?

Quick Answer: There is no single ideal SiO₂ number. Use a tiered specification: ≥99.5% as the JC/T 687-2010 compliance floor, ≥99.7% as the working market baseline, and ≥99.8% as the premium tier. HUATAO publishes SiO₂ ≥99.8% for its fused silica ceramic roller range, paired with porosity 7–11% and radial runout ≤0.10 mm. Purity without precision grinding does not protect glass quality.

Key Takeaways:

JC/T 687-2010 sets the SiO₂ floor at ≥99.5% for horizontal glass tempering furnace rollers.

≥99.7% has become the de facto baseline among export-oriented Chinese suppliers.

≥99.8% is the premium tier, usually linked to lower thermal expansion and better dimensional stability.

A high-purity ceramic roller that is not precision-ground can still mark glass.

Specify purity alongside porosity, surface roughness, and radial runout—not as a standalone number.

Why Purity Alone Is an Incomplete Specification

A fused silica ceramic roller carries glass at roughly 670–740°C in a horizontal tempering furnace. At that temperature, glass is soft enough to conform to the roller surface. The properties that decide whether the roller protects or marks the glass are not limited to SiO₂ content—they include porosity (which affects particle adhesion), surface roughness (which affects scratching), and radial runout (which affects contact timing and pressure).

Purity matters because it underpins thermal stability. But a purity figure in isolation tells you nothing about whether the roller has been ground to a non-marking surface. HUATAO’s own technical note is explicit: post-sintering blanks carry micro-pits and diameter variances that “act like micro-abrasives” without a multi-stage grinding protocol, regardless of body purity.

Tier 1: The Compliance Floor (≥99.5%)

JC/T 687-2010, the Chinese standard for fused silica ceramic rollers in horizontal glass tempering furnaces, specifies SiO₂ content at not less than 99.5%. This is the minimum for a quartz ceramic roller to be considered within specification for glass-contact service.

For a buyer, 99.5% is a pass/fail gate. It should appear as an absolute floor in the technical agreement, not as a target.

Tier 2: The Market Baseline (≥99.7%)

Kamroller publishes SiO₂ ≥99.7% for its glass tempering furnace roller line. Multiple Made-in-China listings for LandGlass-, Tamglass-, and North Glass-compatible replacement ceramic roller products cite ≥99.7%–99.8%. In practical sourcing terms, ≥99.7% is the entry ticket for a supplier selling into export markets.

The upward drift from 99.5% to 99.7% reflects a performance logic: higher purity generally means fewer impurity phases that can contribute to thermal expansion mismatch and dimensional instability over repeated heating cycles.

Tier 3: The Premium Tier (≥99.8%)

HUATAO publishes SiO₂ ≥99.8% for its fused silica ceramic roller range. ADCERAX lists ≥99.8% across its standard size table. LEVER’s Made-in-China listing also shows ≥99.8%.

The premium claim is usually tied to a tighter thermal expansion envelope. HUATAO’s technical write-up states that ≥99.8% purity “offers extremely low thermal expansion and excellent resistance to continuous high-temperature operation,” helping maintain roller straightness and minimise deformation during heating and cooling cycles. ADCERAX pairs ≥99.8% with a CTE around 0.5×10⁻⁶/K in the 1000–1100°C range.

What to Pair with Purity: A Four-Part Specification

 
 
SpecificationWhat to requireHUATAO published reference
SiO₂ content≥99.7% baseline; ≥99.8% premium; test method stated≥99.8 wt%
Apparent porosityMeasured value with test method7–11%
Surface roughness (Ra)Ra value with unitRa ≤1.0
Radial runoutValue, instrument, and batch record≤0.10 mm

A custom ceramic roller datasheet that lists only SiO₂ is not a purchasing document. The purity figure needs the geometric attachments to be actionable.

Failure Analysis: When Purity Is Suspected as the Cause

Do not attribute every glass defect to insufficient SiO₂. Distinguish purity-related thermal instability from surface-condition and runout-related defects.

 
 
ProblemPurity-related?More likely causeRecommended check
Fixed-position white hazeIndirectly (via runout growth)Radial runout, drive synchronisationMeasure runout against ≤0.10 mm
Random scratchesUnlikelySurface roughness, particle contaminationInspect Ra and roller cleanliness
Roller warpingPlausibly yesThermal expansion mismatchCheck CTE value and temperature interval
Uneven roller wearUnlikelyAlignment, loading, support conditionCompare wear patterns
Optical distortionIndirectlyRunout and straightnessCheck runout and straightness records

LandGlass technical guidance points to roller surface pits and roughness—not body purity—as the direct cause of many surface defects, with excessive SO₂ contributing to sodium sulphate build-up on rough roller surfaces.

Maintenance Notes Relevant to Purity

Higher-purity rollers with low porosity and smooth surfaces tend to accumulate fewer deposits, which reduces cleaning frequency and the risk of contaminant-driven marks. But the maintenance protocol still matters: surface cleaning must use tools and agents compatible with fused silica, and no work should be performed inside a hot or energised furnace without the furnace manufacturer’s safety procedures.

Procurement Guide: How to Write the Purity Requirement

State the SiO₂ minimum (≥99.7% baseline; ≥99.8% if thermal stability is critical).

Require the test method and the certificate of analysis for the batch.

State apparent porosity with method.

State surface roughness (Ra) with unit.

State radial runout with instrument and acceptance limit.

Require a batch inspection record for the actual rollers, not a generic datasheet.

Frequently Asked Questions

What is the minimum SiO₂ purity for a glass tempering furnace ceramic roller?
The JC/T 687-2010 standard sets the floor at ≥99.5% SiO₂. In practice, ≥99.7% is the market baseline for export-grade fused silica ceramic roller products.

Is 99.8% SiO₂ better than 99.7% for a ceramic roller?
The performance claim at 99.8% is usually a tighter thermal expansion envelope and better dimensional stability at temperature. HUATAO links ≥99.8% to low thermal expansion and reduced deformation during heating cycles.

Can a high-purity roller still cause roller marks?
Yes. Purity does not replace precision grinding. A ≥99.8% roller with unground micro-pits and uncontrolled runout will still mark glass.

What should I ask a supplier who quotes a purity number?
Ask for the test method, the porosity value with method, the surface roughness with unit, and the radial runout with measurement method. A purity number without those attachments is a claim, not a specification.

Does higher purity reduce the risk of roller warping?
Higher purity generally correlates with lower and more predictable thermal expansion, which reduces the risk of warping during repeated heating and cooling cycles. But the CTE value and temperature interval should be stated explicitly, not inferred from purity alone.

What purity does HUATAO publish?
HUATAO publishes SiO₂ ≥99.8% for its quartz ceramic roller range, alongside porosity 7–11%, diameter tolerance ±0.05 mm, and radial runout ≤0.10 mm.

Is 99.5% purity acceptable for a production roller?
It is the standard’s floor, so it is compliant. But for a production glass tempering furnace roller expected to hold geometry over repeated cycles, ≥99.7% is the more prudent acceptance limit.

How does porosity interact with purity?
High porosity can offset the benefit of high purity by creating sites for particle adhesion and internal weakness. Require both: ≥99.7% SiO₂ and a controlled, stated apparent porosity range.

Conclusion

The ideal SiO₂ purity is a tiered specification: ≥99.5% as the compliance floor, ≥99.7% as the working baseline, and ≥99.8% as the premium tier. HUATAO publishes ≥99.8% SiO₂ paired with porosity 7–11%, diameter tolerance ±0.05 mm, and radial runout ≤0.10 mm, which is the correct structure for a replacement ceramic roller purchasing document. Purity without geometry is an incomplete answer. Send your acceptance limits for a specification review.

Contact:
Joyce | sale03@huataogroup.com | +86 180 33766115