language

HUATAO GROUP
News & Events

We Help Customers To Meet The Great Challenges Of Our Time.

VIEW PRODUCTS
scroll down

Back to Overview

Why Does White Haze Appear on Glass After Tempering in a Roller Furnace?

Nov 16,2026

Why Does White Haze Appear on Glass After Tempering in a Roller Furnace?

Why Does White Haze Appear on Glass After Tempering in a Roller Furnace?

1. Can Dust and Debris on Ceramic Rollers Cause White Haze?

Yes. Contamination on the roller surface is one of the first things worth checking when white haze appears on tempered glass.

During continuous production, fine glass particles, dust, and other residues may accumulate on the roller surface. When hot glass passes over contaminated rollers, these particles can transfer onto the glass or create localized contact marks. Even small amounts of contamination may affect the appearance of the finished glass, particularly when producing high-quality coated or clear glass.

Another issue is that roller surfaces may gradually deteriorate after long-term operation. Surface wear, small pits, deposits, or powder shedding can increase the risk of glass surface defects.

For this reason, operators should regularly inspect the surface condition of each ceramic roller, rather than focusing only on furnace temperature.

Practical recommendations:

Regularly inspect roller surfaces for dust, particles, and accumulated deposits.

Remove glass fragments and other contaminants using suitable cleaning tools.

Avoid aggressive cleaning methods that may scratch or damage the roller surface.

Check whether white haze repeatedly appears in the same position on different glass sheets.

Inspect rollers showing abnormal wear, pitting, or powder shedding.

If the same haze pattern repeatedly appears in a particular area, checking the corresponding ceramic roller position can provide useful clues.

2. How Does Furnace Air Contamination Contribute to White Haze?

The internal environment of a tempering furnace is another factor that should not be overlooked.

During long-term operation, dust, refractory particles, insulation fibers, and other contaminants may accumulate inside the furnace. Air movement and thermal circulation can carry these particles toward the hot glass surface. When contaminants settle on hot glass, they may leave deposits or cloudy marks that become visible after tempering.

Damaged furnace insulation or deteriorating refractory materials can make this problem worse. In addition, loose particles generated during maintenance or previous glass breakage may remain inside the furnace if cleaning is insufficient.

However, not every white haze problem is caused by airborne contamination. The appearance and distribution of the marks should be examined together with glass washing conditions, roller cleanliness, and furnace operating parameters.

Practical recommendations:

Inspect furnace insulation for loose fibers and damaged areas.

Remove glass fragments and accumulated dust after the furnace has cooled safely.

Check whether contamination is concentrated around specific furnace sections.

Maintain a clean production environment before glass enters the furnace.

Follow appropriate furnace cleaning and maintenance procedures.

Keeping the furnace interior clean also helps protect the surface of every ceramic roller and reduces the possibility of particles transferring to the glass.

3. Can Uneven Cooling Make White Haze More Visible?

Yes. Cooling conditions can influence the final appearance and optical quality of tempered glass.

After heating, glass enters the quenching section, where controlled air cooling creates the required tempering stress. If the cooling distribution is uneven, the glass may develop variations in stress distribution, flatness, or optical appearance. These variations can sometimes make cloudy areas or existing surface defects more noticeable.

It is important to distinguish between actual surface contamination and optical haze caused by changes in the glass itself. They may look similar under certain lighting conditions but require different solutions.

Operators should therefore check:

Whether the upper and lower quenching air pressures are properly balanced.

Whether air nozzles are clean and operating correctly.

Whether the cooling distribution is consistent across the glass width.

Whether glass thickness and furnace settings are correctly matched.

Whether the defect appears on the surface or is related to optical distortion.

Simply increasing cooling pressure or changing the temperature settings without identifying the cause may create additional quality problems. Stable heating and cooling conditions are essential for maintaining consistent glass quality.

4. How Can Ceramic Roller Quality Affect White Haze?

The quality and surface condition of quartz ceramic rollers are important considerations in glass tempering production.

A roller may look acceptable from a distance but still have small surface defects that affect glass transportation and contact conditions. For example, accumulated deposits, rough areas, cracks, or powder shedding may create repeated surface defects during continuous production.

When evaluating replacement rollers, glass manufacturers should consider several factors:

Raw material quality: High-purity fused silica is widely used for glass tempering furnace rollers because of its low thermal expansion and suitable thermal stability.

Surface quality: The roller surface should be inspected for visible cracks, chips, rough areas, and uneven deposits. Consistent surface quality helps maintain stable contact with the glass.

Dimensional accuracy: Diameter, length, wall thickness, and straightness should match the actual furnace requirements. Incorrect dimensions may affect installation and conveying stability.

Manufacturing consistency: Consistent manufacturing and inspection procedures help reduce differences between rollers and support reliable operation in continuous production.

A properly specified ceramic roller is an important part of maintaining stable glass transportation and reducing avoidable surface quality problems.

5. How Should Glass Tempering Factories Troubleshoot White Haze?

When white haze appears, replacing all the rollers immediately is not always the best solution. A systematic inspection can help identify the actual source and avoid unnecessary replacement costs.

We recommend checking the following areas:

Glass washing: Check whether incoming glass is completely clean and free from grinding dust, water stains, and detergent residue.

Roller condition: Inspect the rollers for contamination, surface wear, cracks, and powder shedding.

Furnace cleanliness: Check for loose insulation fibers, refractory particles, and accumulated glass fragments.

Temperature distribution: Review the heating profile and check for abnormal temperature differences.

Cooling conditions: Inspect quenching air distribution and confirm that the cooling system is operating consistently.

Defect patterns: Record where the haze appears, whether it repeats on successive sheets, and whether it is concentrated on the top or bottom surface.

For example, if white haze repeatedly appears at the same position across multiple glass sheets, a localized ceramic roller or furnace issue deserves closer inspection.

If the haze varies from sheet to sheet, incoming glass cleanliness, furnace contamination, and process stability should also be investigated.

This approach helps operators distinguish between roller-related defects and problems originating elsewhere in the production line.

6. HUATAO Quartz Ceramic Rollers for Glass Tempering Furnaces

HUATAO specializes in quartz ceramic rollers, also known as fused silica ceramic rollers, for glass tempering furnace conveyor systems.

We understand that roller surface quality, dimensional accuracy, and material consistency are important for glass manufacturers seeking stable production and good finished-glass quality.

HUATAO provides customized quartz ceramic rollers according to customer drawings, dimensions, and actual furnace requirements.

Our product and customization focus includes:

Fused silica raw material selection.

Customized roller length, diameter, and wall thickness.

Attention to straightness and dimensional accuracy.

Roller surface quality inspection.

Specifications matched to different furnace configurations.

Our rollers can be considered for replacement and customized applications in glass tempering production lines using equipment from North Glass, LandGlass, Glaston, LiSEC, and other manufacturers.

If your factory is experiencing white haze, roller marks, or other surface defects, checking the condition and specifications of your existing ceramic roller is a useful starting point.

Contact: Joyce
Email: sale03@huataogroup.com
Phone / WhatsApp: +86 180 33766115