language

HUATAO GROUP
News & Events

We Help Customers To Meet The Great Challenges Of Our Time.

VIEW PRODUCTS
scroll down

Back to Overview

Helicoid vs Sectional Screw Flighting Machine for Abrasive Materials

Nov 17,2026

Helicoid vs Sectional Screw Flighting Machine for Abrasive Materials

For abrasive duty, sectional flighting is the conventional and generally more durable specification. Cold-rolled helicoid flighting is geometrically disadvantaged at the wear zone: the rolling process thins the outer edge, and the outer edge is where abrasive sliding wear is concentrated. Sectional flighting keeps plate thickness at the rim and supports abrasion-resistant grades.

The Geometry Problem with Helicoid

Helicoid flighting is formed by cold rolling strip between cone-shaped dies. The outer edge compresses and thins as the helix is drawn, producing a blade that is thickest at the root and thinnest at the periphery.Independent flight manufacturers describe the consequence plainly: cold-rolled helicoid “inevitably thins towards the outer edge — exactly where the wear happens,” while a pressed sectional flight “keeps its full thickness across the whole cross-section.”For a wear part, that difference is not cosmetic—it sets the available service life.

Where Helicoid Still Fits

None of this makes helicoid unsuitable everywhere. Cold rolling work-hardens the flight surface, giving moderate abrasion resistance at low cost.Heavy-duty helicoid is routinely applied to limestone, cement and fertilizer where the duty is not extreme.If the material is mildly abrasive, the diameter and pitch sit within standard CEMA helicoid ranges, and the plant prioritizes first cost over maximum wear life, helicoid can be entirely rational.

Where Sectional Becomes Necessary

Sectional flighting becomes the stronger choice when the material is highly abrasive—alumina, fly ash, glass cullet, mineral sands, cement clinker—or when the required plate grade is outside the cold-rolling envelope. Sectional fabrication accepts Hardox 400/450/500, AR plate and manganese steel, so wear resistance can be specified as a plate property rather than relying on a work-hardened skin.For thick plate, large diameters, or non-standard pitches, sectional is often the only practical route.

Maintenance Economics

A worn helicoid is replaced as a continuous helix or hard-faced in place. A sectional screw can incorporate bolted, replaceable segments, so a localized worn zone is changed without dismantling the full screw. In abrasive service, where downtime frequently exceeds the cost of the replacement part, that difference can dominate the lifecycle comparison.

Practical Rule

Default to sectional when abrasion is the governing wear mechanism. Use helicoid when abrasion is moderate, the size is standard and budget drives the decision.

Contact: Lucy Chai | Lucy.chai@huataogroup.com | www.refinerdisc.com | WhatsApp: +86 15373883537

#ScrewFlight #SpiralBlade #MetalForming #HUATAO #auger #screwconveyor #feedmixer #AbrasiveWear #Hardox