language

HUATAO GROUP
News & Events

We Help Customers To Meet The Great Challenges Of Our Time.

VIEW PRODUCTS
scroll down

Back to Overview

Which Hydraulic Press Is Suitable for Forming Large-Diameter Screw Flights?

Nov 18,2026

Which Hydraulic Press Is Suitable for Forming Large-Diameter Screw Flights?

Large-diameter screw flights require a forming machine that can handle the complete geometry of the finished blade. Outer diameter is an important starting point, but it is not the only selection criterion. Inner diameter, pitch, plate thickness, material grade and mold configuration all influence the final machine choice.

For manufacturers producing individual screw flights, a hydraulic single-piece flights screw forming machine offers a practical forming route. The HT240, HT280 and HT330 are the main large-format models in the current product range.

1. Why Choose Hydraulic Single-Piece Forming?

Hydraulic pressing is designed to form individual spiral blades using a matched mold. The prepared metal plate is positioned in the machine and shaped through hydraulic pressure.

This process is suitable for production involving large or customized single-piece flights, particularly when the manufacturer needs to work with different dimensions and materials.

It is important to select the correct manufacturing route. A hydraulic press produces individual blades, while a continuous screw flight cold rolling machine is intended for continuous flight forming. A winding spiral blade forming machine uses another forming method. The choice should follow the required product geometry and production plan.

2. Large-Diameter Model Selection

The HT240 is a suitable starting point for reviewing larger screw flight requirements. Its catalogue specifications include an outer diameter below 1,200 mm, thickness from 2–35 mm and pitch from 180–1,000 mm. The hydraulic pressure is listed as 120 tons at 20 MPa.

For a larger diameter and thicker plate range, the HT280 is listed with an outer diameter below 1,600 mm, thickness from 2–40 mm and pitch from 240–900 mm. Its hydraulic pressure is 180 tons at 20 MPa.

For the largest listed single-piece flight range, the HT330 has an outer diameter below 2,400 mm, thickness from 2–50 mm and pitch from 240–900 mm. Its hydraulic pressure is 260 tons at 20 MPa.

These are individual catalogue limits. The actual combination of diameter, thickness, pitch and material must be checked before confirming the machine model.

3. What Should Be Checked Before Ordering?

The most useful starting point is the finished flight drawing.

The outer diameter defines the overall blade size. The inner diameter determines the central opening. Pitch affects the spiral geometry, while plate thickness and material influence the forming requirements.

Material selection deserves particular attention. The product information identifies carbon steel, 304 stainless steel, 201 stainless steel and HARDOX among the materials used for screw blade production. However, suitability must be confirmed for the exact material grade and thickness.

The mold is equally important. It must correspond to the intended flight geometry. If the buyer plans to manufacture several different sizes, the supplier should review the full product range instead of evaluating only one sample.

4. Customized Configuration for Different Production Needs

A screw conveyor manufacturer may need to produce different flight diameters, pitches and plate thicknesses for different equipment projects. A customized machine configuration can be evaluated according to the actual blade dimensions and material.

This is why the machine should be selected through technical review rather than by model number alone.

When requesting a quotation, provide the smallest and largest flight specifications, the most difficult product, material grade, plate thickness and estimated production volume. If possible, include both the finished blade drawing and the flat blank drawing.

5. Warranty, Service Life and Maintenance

Long-term operating cost is an important part of equipment selection.

The machine is offered with a one-year warranty. Based on the product information provided, its service life can reach approximately 7–8 years under suitable operating and maintenance conditions.

The design has very few wearing parts. Parts that may require replacement are inexpensive and easy to change. This helps simplify maintenance planning and reduces the complexity of routine replacement work.

Operators should still follow the operating instructions, inspect the hydraulic system and mold regularly, and maintain the machine according to actual production conditions.

6. Request a Machine Evaluation

For large-diameter screw flight production, HT240, HT280 and HT330 are the primary models to review. The final choice depends on the complete blade dimensions, material and production requirements.

Share your fligh material grade and target dimensions to receive a suitable machine recommendation.

 

Contact
Lucy Chai 
Email:Lucy.chai@huataogroup.com 
WhatsApp: +86 15373883537
www.refinerdisc.com