language

HUATAO GROUP
News & Events

We Help Customers To Meet The Great Challenges Of Our Time.

VIEW PRODUCTS
scroll down

Back to Overview

What Is the Best Way to Manufacture Screw Flights for Horizontal TMR Mixers?

Nov 19,2026

What Is the Best Way to Manufacture Screw Flights for Horizontal TMR Mixers?

Horizontal TMR mixers require screw-shaped components to move and mix feed materials inside the mixing chamber. When manufacturing new mixer augers or replacement flights, the forming process must match the original component design.

For individual spiral sections, a single-piece hydraulic screw flight forming machine is one option to evaluate. It uses a hydraulic press and forming mould to shape separate flight sections.

However, the best manufacturing method depends on the flight construction, dimensions, material and production requirements.

1. Identify the Flight Structure First

Before choosing a machine, confirm whether the mixer uses sectional flights or continuous spiral flighting.

Check the inner diameter, outer diameter, thickness and pitch. Also confirm how the flight connects to the shaft and whether the design includes special profiles.

These details help determine whether individual hydraulic pressing, continuous cold rolling or winding is the appropriate process.

2. Consider Material and Wear Requirements

The material should be selected according to the mixer design and working conditions.

The HUATAO machine brochure lists carbon steel, 304 stainless steel, 201 stainless steel and HARDOX steel as processable materials.

For a TMR mixer, the actual material choice should be confirmed against the original component specification, feed characteristics and expected wear conditions. The brochure does not specify a universal TMR mixer material recommendation.

3. Select the Appropriate Forming Process

Single-piece hydraulic pressing forms individual spiral blade sections. It can be evaluated for sectional TMR mixer flights when the required dimensions are within the machine's working range.

Continuous cold rolling forms continuous screw flights through a rolling process. It is a different production method and should be considered when the product design requires continuous flighting.

Winding-type forming uses strip material to produce spiral blades through winding. It is another separate process.

The three methods should not be treated as interchangeable. The original flight construction should determine the machine type.

4. Match the Machine to Flight Dimensions

The HUATAO brochure includes single-piece hydraulic models such as HT240, HT280 and HT330.

The HT240 is listed for plate thickness of 2–35 mm and OD below 1200 mm. The HT280 is listed for 2–40 mm and OD below 1600 mm. The HT330 is listed for 2–50 mm and OD below 2400 mm.

These specifications are model ranges, not a guarantee that the maximum thickness and maximum diameter can be processed together. The required ID, OD, thickness, pitch and material must be assessed as one complete combination.

5. Initial Machine Selection Does Not Require a Drawing

To evaluate a suitable machine, we only need five basic details:

Inner diameter

Outer diameter

Plate thickness

Material grade

Pitch

These specifications provide the starting point for model selection. A drawing or sample can be supplied later if the flight includes non-standard profiles or connection details.

This makes it easier for TMR mixer manufacturers and replacement-parts producers to begin discussing equipment before completing a full engineering drawing.

6. Consider Warranty and Maintenance

HUATAO provides a one-year warranty for the machine. Under suitable operating and maintenance conditions, the expected service life can reach approximately 7–8 years.

The machine has very few wearing parts. Replacement parts are inexpensive and easy to change, helping make routine maintenance more manageable.

Actual service life depends on operating frequency, working conditions and maintenance practices.

Frequently Asked Questions

Can hydraulic pressing manufacture TMR mixer screw flights?

It can be evaluated for individual flight sections, provided the required dimensions and material are within the machine's forming range.

Which material is suitable for a TMR mixer flight?

The choice should follow the mixer design and working conditions. The machine brochure lists carbon steel, 304 stainless steel, 201 stainless steel and HARDOX as processable materials.

Can a machine be selected without a drawing?

Yes. ID, OD, thickness, material and pitch are enough for an initial assessment.

Can large-diameter flights be formed?

Larger models, including HT280 and HT330, are listed in the brochure. The full dimensional combination must be checked before confirming the model.

Discuss Your TMR Mixer Flight Project

HUATAO can evaluate a suitable single-piece hydraulic screw flight forming machine according to your flight dimensions and material.

Send us the five basic specifications to start the selection process.

Contact
Lucy Chai 
Email:Lucy.chai@huataogroup.com 
WhatsApp: +86 15373883537
www.refinerdisc.com

PREVIOUS: